Bond Master 200

Method of Application:

• Add 5 to 6 litre water la 20 kg pack powder.
• Mix with suitable mechanical stirred until a lamps free homogenous paste.
• Leave mixture for 5 min. before use.

Suitable Substrates  :

• Concrete/Cement Plaster/Brick Masonry/
• Cement Based Screeds • Cement Based Surfaces

Drying Time : Single coat dries to the touch within 1-2 hours and Hard Dry within 24-48 hours

Standard Compliance/ Specification: We are proud to inform you that all our products adhere strictly to Isl norms, ensuring the highest level of quality and durability.

Consumption: Approx 1.2 Kg/m2 per mm of thickness covarge will vary depending on trowel notch size, type, size of tile and substrate smoothness and evenness.

Precaution & Note: 

• Always add powder to water.
• Do not add excess water than recommended. Never add sand & cement at site.
• Do not use on wet screed. Surface must be fully cured.
• Do not use the adhesive to correct surface irregularities greater than 15 mm.

Packing & Color: 20Kg.Grey

Shelf Life: 12 months for sealed pack when stored cover, Out of direct sunlight, damp proof condition and protect from extremes of temperature.